
Anchor industry
Machinery & Equipment
Industrial machinery, processing equipment and spare parts — crated, secured and documented for export.
Built for equipment manufacturers
We ship for equipment manufacturers in Minnesota and across the Midwest: processing equipment, conveyors, agricultural and industrial machinery, and the spare parts that follow them overseas.
Machinery rarely fits a standard box neatly. Size, weight, center of gravity and how it's secured decide the equipment, the route and the cost. We work that out before the quote, not at the port.

What we move
- Industrial processing equipment
- Agricultural machinery
- Conveyors and material handling equipment
- Pumps, motors and compressors
- Complete production lines, shipped in sections
- Spare parts and service kits

Oversized machinery: flat racks and open tops
Oversized equipment ships on flat racks or in open-top containers, loaded from the side or from above by crane. Carriers need exact dimensions, weight and lifting points before they accept the booking, and space for oversized cargo is limited on many sailings. We collect drawings and weights up front and book early.
How it moves
- 1
Manufacturer
Equipment finished, crated or skidded.
Checks: dimensions, weight, lifting points.
- 2
Crating and loading
Crated, blocked and braced in a dry container, or secured on a flat rack or open top.
Checks: lashing, weight distribution.
- 3
Inland
Truck or rail to the port, with oversize permits where needed.
Checks: permits, route.
- 4
Port
Oversized cargo booked and approved by the carrier.
Docs: dimensional drawing, VGM.
- 5
Ocean
Docs: bill of lading, export filing coordinated through our broker partner.
- 6
Destination
Delivered to the importer or job site.
Docs: commercial invoice, packing list, certificate of origin.
What goes wrong, and how we handle it
- Oversized surprises.
- A crate a few inches over the door height changes the equipment, the rate and the sailing. We get final dimensions before booking, not after crating.
- Limited special equipment.
- Flat racks and open tops are scarcer than dry containers, especially inland. We book early and confirm equipment before your crate is ready.
- Export controls.
- Some machinery needs an export classification and, for certain destinations, a license. We work through it with you and file the export record through our broker partner.
- Wood packaging rules.
- Crates, skids and pallets going overseas must be heat-treated and stamped under ISPM 15, or the destination can refuse or fumigate them. We check before it ships.
- Damage in transit.
- Machinery shifts if it isn't blocked and lashed for the voyage. We plan securing for the ocean leg, not just the truck.
- Line-down spare parts.
- When a customer's production is stopped, parts need to move fast. We quote air and ocean side by side.
How to ship machinery overseas
Measure and weigh. Get final crated dimensions, gross weight and lifting points. Everything else depends on these.
Choose the container. Dry or high cube if it fits through the doors; open top if it's too tall; flat rack if it's too wide or heavy.
Crate to ISPM 15. Use heat-treated, stamped wood, and block and brace for the ocean, not just the truck.
Classify for export. Confirm the export classification and whether the destination needs a license.
Book early and secure. Special equipment and oversized space are limited, so book as soon as dimensions are final.
What drives the cost of shipping machinery
- Dimensions and weight — oversized and heavy cargo needs special equipment and space
- Container type — flat racks and open tops cost more than dry containers
- Inland moves — oversize permits, escorts or rail to the port
- Crating and securing — ISPM 15 wood, blocking, bracing and lashing
- Origin and destination — port, routing and destination charges
- Cargo insurance — worth it on high-value equipment
Send us dimensions, weight and destination and we'll quote the full move, door to door.
Get an equipment quoteEquipment guide
| Equipment | Packaging | When to use it |
|---|---|---|
| 20' / 40' dry | Crated or skidded machinery, spare parts | Equipment that fits through the doors |
| 40' high cube | Taller crated equipment | Extra height inside a standard container |
| 20' / 40' open top | Tall machinery loaded by crane | Too tall for the doors, within width |
| 20' / 40' flat rack | Oversized, wide or heavy equipment | Cargo that doesn't fit inside a container |
| Air freight | Spare parts, urgent components | Line-down situations |
20' / 40' dry
Packaging: Crated or skidded machinery, spare parts
When to use it: Equipment that fits through the doors
40' high cube
Packaging: Taller crated equipment
When to use it: Extra height inside a standard container
20' / 40' open top
Packaging: Tall machinery loaded by crane
When to use it: Too tall for the doors, within width
20' / 40' flat rack
Packaging: Oversized, wide or heavy equipment
When to use it: Cargo that doesn't fit inside a container
Air freight
Packaging: Spare parts, urgent components
When to use it: Line-down situations
More detail: Container sizes · Container loading guide · Blocking & bracing guide
Related services: Ocean freight · Project logistics · Air freight · Export support
Documents
- Commercial invoice
- Packing list with crate dimensions and weights
- Bill of lading
- Certificate of origin
- Export filing coordinated through our licensed broker partner
- Export license where required
- ISPM 15 heat-treated and stamped wood packaging
Frequently asked questions
Can you ship equipment that doesn't fit in a standard container?
Yes, on flat racks or in open-top containers. Send dimensions, weight and a drawing with lifting points, and we'll confirm the equipment and the sailing.
Do you help with crating?
We work with your shipping team or crating partner on crating, blocking and bracing so the cargo is protected for the full voyage.
Does my machinery need an export license?
Most doesn't, but some does, depending on the equipment and the destination. The classification is yours as the exporter; we help you work through it and file the export record through our broker partner.
What is ISPM 15?
The international rule for wood packaging. Crates, skids and pallets going overseas must be heat-treated and stamped, or they can be refused or fumigated at destination at your cost.
Can you ship spare parts fast?
Yes. We quote air and ocean side by side so you can choose speed or cost.
Do you ship complete production lines?
Yes, as multiple crates and containers moving together, with a packing list that ties each piece to the line.
Ready to Move Freight?
Tell us what you're shipping, where it's going, and when it needs to arrive. We'll respond the same business day.