Skip to content
Conveyco

Pulses, Grains & Specialty Crops guide

Bagged vs bulk loading for pulses and grains

Short answer

Choose by what the receiver can unload. Bulk in a container liner usually fits the most pulses or grain per box but needs a tilting chassis or vacuum at destination. Bulk bags (FIBCs) suit forklift receivers. Small bags, floor-loaded or on pallets, cost more to pack but can be handled almost anywhere. Agree the method in the sales contract, and plan the phytosanitary sampling around it.

Tray Grismore · Co-Owner, Business Development

Last reviewed · 8 min read

On this page
Quick facts
Main deciding factorThe receiver's unloading equipment and how they resell
Most product per boxUsually bulk with a liner, then bulk bags, then floor-loaded small bags
Fastest to unload by forkliftPalletized bags and bulk bags
Wood rulePallets and dunnage must meet ISPM 15 in most countries
Common pitfallLoading bulk before the phytosanitary sample is taken

What decides whether pulses and grains ship bagged or in bulk?

The receiver decides more than the shipper. Before choosing between bagged and bulk loading for pulses or grain, ask four questions:

  • How will they unload? Bulk in a liner needs a tilting chassis, a pit or a vacuum system. Bulk bags need a forklift. Small bags only need people, or a forklift if they're palletized.
  • How do they sell the product? A buyer who resells in sacks may want it bagged at origin. A processor or packer usually wants bulk.
  • How much do they want per container? Bulk usually carries the most per box, which matters when freight is a large share of the landed cost.
  • What does the contract say? Write the method, bag size and type, and labeling into the sales contract so nobody argues at destination.

For dense pulses and grains, weight usually fills a 20-foot box before space does, so the payload difference between methods can be smaller than you'd expect. Check the carrier's payload and the road weight limit to the port before you assume bulk wins. A freight forwarder for pulses, grains and specialty crops can run that check for the actual route.

How do floor-loaded, palletized, bulk-bag and liner loading compare?

Four ways to load pulses and grain into a dry container
Floor-loaded small bagsPalletized small bagsBulk bags (FIBC)Bulk with a liner
Origin equipmentLabor, or a conveyor into the boxForklift and dockForkliftLiner, blower or conveyor
Destination equipmentLaborForkliftForkliftTilting chassis, pit or vacuum
Product per containerHigher than palletsLower — pallets take space and weightMiddleUsually the most
Packing costBags plus laborBags, pallets, wrapBulk bagsLiner only
Main damage riskTorn bags, shifting stacksLeaning or collapsing stacksBags sagging into each otherLiner tears, wet floor
Sampling for inspectionBefore or during loadingBefore loadingBefore or during loadingBefore or during loading — hard once full

No method is wrong. The best one is whatever the receiver can handle without damage or delay.

What should you know about loading pulses and grain in bags?

Bagged loading is the most flexible option. A few things keep it clean:

  • Bag type. Woven polypropylene and multiwall paper are both common. Match the bag to the buyer's request and to the product — some pulses, such as split peas and lentils, are easy to damage with rough handling.
  • Stacking. Interlock floor-loaded bags so the stack can't shift, and keep weight evenly spread across the floor. Leave the door end secured so bags don't fall when the container is opened.
  • Pallets. Wood pallets and dunnage in international trade must generally meet ISPM 15 — heat-treated or fumigated and stamped with the official mark. Untreated wood can be held or removed at destination. Plastic or paper slip sheets avoid the question.
  • Marking and labeling. Many buyers want lot numbers, crop year, origin and net weight on each bag. Consumer-ready packs face the destination's food labeling rules, which USDA FAS summarizes country by country in its FAIRS reports.

Bulk bags, often called totes or super sacks, sit between bags and bulk. They load and unload quickly by forklift, but they need good bags with lifting loops rated for the weight, and they can lean against each other in transit if not braced.

What should you know about bulk loading pulses and grain with a liner?

A liner is a large bag fitted inside a standard dry container. A bulkhead of steel bars or a reinforced panel holds it at the doors. The product goes in through a hatch at the top of the bulkhead, by blower or conveyor, and comes out through a discharge spout when the container is tipped or vacuumed at destination.

Bulk liner loading works well when:

  • The receiver has a tipping chassis, a pit or vacuum unloading.
  • The product is free-flowing — whole pulses, soybeans, corn and similar.
  • You want the most product per container with the least packaging.

The risks are mostly in the box itself. The container floor and walls must be clean, dry and free of nails or splinters that can tear the liner. The liner must fit the container size. And once the liner is full, an inspector can't easily take a representative sample, so arrange the phytosanitary and any quality sampling at the loading spout or before loading.

Does the loading method change documents, weight or inspections?

The documents stay the same — bill of lading, commercial invoice, packing list, EEI, and a phytosanitary certificate for most destinations. What changes is how the details read:

  • Packing list and bill of lading describe the packaging: number of bags and bag weight, number of bulk bags, or "in bulk" with the liner.
  • Weight. The verified gross mass includes bags, pallets, liner and bulkhead as well as the product and the container's tare. Bulk loads are often weighed on a scale after loading; bagged loads can be calculated from counted bags.
  • Phytosanitary inspection. APHIS asks exporters to arrange inspection before goods are loaded. That's simple for stacked bags, harder for bulk, so agree with your inspector where and when the sample is taken. The phytosanitary certificate guide covers the full process.

For the rest of the container basics — sizing, moisture and cut-offs — see how to export dry beans in containers.

What happens at destination when a bagged or bulk container is unloaded?

The unloading method is the other half of the decision, and it's the half the shipper never sees. Ask the buyer how they plan to empty the container before you agree the packaging.

  • Bagged loads are unloaded by hand or, if palletized, by forklift at a dock. Hand unloading takes the longest, which matters if the receiver pays for the container by the day.
  • Bulk bags come out by forklift, one at a time, so the receiver needs a forklift that can reach into the container and lift the full bag weight.
  • Liner loads are tipped on a tilting chassis so the product flows out through the discharge spout, or vacuumed out. The empty liner is then removed and disposed of by the receiver.

Whatever the method, the receiver must return the empty container to the carrier on time. Keeping it past the carrier's free time can draw detention, so a slow unloading method can cost the buyer money. Agree who pays for that in the terms of sale.

How does Conveyco handle bagged and bulk pulse shipments?

We book the right container for the loading method, line up the trucking or rail to the port, and coordinate the documents and cut-offs with you, so the packing list, VGM and bill of lading match what went in the box. Tell us the product, packaging, origin and destination and we'll reply with a quote the same business day. More on what we move: Pulses, Grains & Specialty Crops.

Sources

Frequently asked questions

Is it better to ship pulses bagged or in bulk?

It depends mostly on what the receiver can unload and how they sell the product. Bulk in a container liner usually fits the most product per box but needs tipping or vacuum unloading at destination. Bags cost more to pack but can be unloaded by hand or forklift almost anywhere.

What is a container liner for bulk grain?

A liner is a large bag fitted inside a dry container, with a bulkhead at the doors and a hatch for loading and a spout for discharge. Grain or pulses are blown or conveyed in through the hatch. At destination the container is tipped on a tilting chassis or the product is vacuumed out.

Should bags be floor-loaded or palletized in a container?

Floor-loaded bags usually fit more product per container because pallets take space and weight. Palletized bags load and unload faster with a forklift. Ask the buyer which they can handle before you choose.

Do wood pallets need to be treated for export?

Yes, in most cases. Most countries apply the international standard ISPM 15, which requires wood packaging such as pallets and dunnage to be treated and marked with the official stamp. Untreated wood can lead to the shipment being held or the wood removed at destination.

Does the loading method change the phytosanitary inspection?

It can. Product in bags can often be sampled before the bags go into the container, while bulk in a liner is hard to sample once it's loaded. APHIS asks exporters to arrange inspection before the goods are loaded, so plan the sampling around your loading method.

Shipping agri overseas?

Tell us the product, origin and destination. We reply the same business day — by email or phone, whichever suits you.

Get an agri export quote

More on this industry: Pulses, Grains & Specialty Crops · all agri guides