Pulses, Grains & Specialty Crops guide
How to export dry beans in containers
Short answer
Most U.S. dry beans export in 20-foot dry containers, packed in bags, bulk bags or loose in a container liner. Because beans are dense, the box usually reaches its weight limit before it is full. Before the container sails you need a booking, a clean dry container, a phytosanitary certificate for most destinations, a verified gross mass, and an EEI filed in AES at least 24 hours before vessel loading.
Tray Grismore · Co-Owner, Business Development
Last reviewed · 9 min read
On this page
| Usual container | 20-foot dry — weight, not space, is normally the limit |
|---|---|
| Packaging | Small bags, bulk bags (FIBC) or bulk with a container liner |
| Key documents | Phytosanitary certificate, bill of lading, EEI/ITN, commercial invoice, packing list; certificates the buyer or destination asks for |
| Before sailing | VGM to the carrier, EEI filed at least 24 hours before vessel loading |
| Common pitfall | Loading before checking the destination's phytosanitary and fumigation requirements |
Why do dry beans usually ship in 20-foot containers?
Dry beans are heavy for their size. A 20-foot dry container filled with beans will usually reach the allowed weight long before the beans reach the roof, so a 40-foot container rarely lets you ship more. That makes the 20-foot box the normal choice for bean exports.
Three limits decide how much you can load:
- The carrier's maximum payload for that container, given in the booking or the carrier's equipment specifications.
- The container's own rating, shown on its CSC safety approval plate.
- U.S. road and rail limits on the way to the port. On the Interstate system, federal law caps a truck's gross vehicle weight at 80,000 pounds, and that includes the tractor, chassis and empty container. States can allow heavier loads on some roads with a permit. Rail moves have their own limits.
The practical answer is to plan the weight per container with your forwarder before you book, not at the loading dock. Overweight containers can be refused at the terminal, which means unloading and reloading. A freight forwarder handling pulses, grains and specialty crops will check the payload for the specific carrier and route.
Should dry beans ship bagged, in bulk bags or in bulk with a liner?
There are three common ways to pack beans into a container. The right one is usually whatever the buyer can receive and sell.
| Small bags | Bulk bags (totes / super sacks) | Bulk with a liner | |
|---|---|---|---|
| How it's loaded | By hand or on pallets | By forklift | Blown or conveyed in through a liner hatch |
| How it's unloaded | By hand or forklift | By forklift | Tipped on a tilting chassis or vacuumed out |
| Product per container | Lower — packaging and any pallets take space | Middle | Usually the most |
| Best when | The buyer sells or repacks in bags | The buyer has a forklift but no bulk handling | The buyer can take bulk and wants the most product per box |
| Watch out for | Torn bags and loose loads shifting | Bags that sag and lean in transit | Liner fit and a clean, sealed container floor |
Whatever you choose, write it into the sales contract with the bag size or liner type, so there's no argument at destination.
How do you keep beans dry and clean inside the container?
Food cargo needs a food-quality container: clean, dry, free of odors and previous-cargo residue, with no holes, loose rust or damaged floorboards. Inspect the empty box before you load and refuse one that isn't right. It costs far less to swap a container than to have a load rejected.
Moisture is the other risk. As the container moves between warm and cool climates, moisture in the air inside can condense on the roof and walls and drip onto the cargo. Shippers often call this "container rain". The usual protections are:
- Load beans that meet the moisture specification in the contract.
- Keep the product and packaging dry while you load — don't stuff in the rain.
- Line the walls and floor with kraft paper or cardboard, and add desiccant bags or strips where the buyer allows them.
- Use dry dunnage and pallets.
Which documents does a dry bean export need?
The set depends on the destination and the buyer, but these come up on most bean shipments:
- Phytosanitary certificate. Issued by USDA APHIS through its Phytosanitary Certificate Issuance and Tracking system (PCIT) after the beans are inspected, by APHIS or by an authorized state or county official. Each country sets its own requirements — additional declarations, treatment statements, or an import permit — and they're listed by commodity in APHIS's Phytosanitary Export Database (PExD). Check PExD before you load, because a certificate can only state what was actually done. A phytosanitary certificate issued with wrong details can hold the container at destination.
- Fumigation certificate, when the destination requires the beans to be fumigated before export. Whether it's needed, and how it must be done, is shown in the destination's requirements.
- Official inspection and grade certificate, when the contract asks for one. USDA's Agricultural Marketing Service, through its Federal Grain Inspection Service (FGIS), inspects and grades beans against the U.S. Standards for Beans. It's a voluntary service, but many contracts and letters of credit require it.
- Electronic Export Information (EEI) filed in the Automated Export System. Most commercial exports need one, and for ocean cargo it must be filed at least 24 hours before the container is loaded on the vessel. The filing returns an ITN for the shipping documents. See EEI / AES.
- Commercial invoice, packing list and bill of lading, plus a certificate of origin if the buyer needs one for their import duty.
Customs at destination is the buyer's side of the deal under most terms of sale; when we handle it, we coordinate it through a licensed broker partner.
How do you classify dry beans for export (Schedule B)?
The EEI needs a Schedule B number — the Census Bureau's 10-digit export classification, built on the international HS code. Most dried beans fall under heading 0713, "dried leguminous vegetables, shelled". The exact 10-digit number depends on the type of bean, so look it up in the Census Bureau's Schedule B search tool rather than reusing a number from another product. The same first six digits usually appear in the buyer's import declaration, so a wrong number causes questions at both ends.
How do VGM and the cut-offs work for a bean shipment?
Under the SOLAS convention, a packed container can't be loaded on a ship until the shipper has given the carrier its verified gross mass — the weight of the cargo, the packaging and dunnage, and the empty container. You can weigh the packed container (method 1) or weigh everything that goes in and add the container's tare weight (method 2).
Every sailing comes with a set of dates from the carrier and terminal:
- ERD — the first day the terminal will accept the loaded container.
- Cargo cut-off — the last day it can arrive and still make the vessel.
- Documentation and VGM cut-offs — when shipping instructions and the VGM are due.
If the container moves by rail from an inland ramp, the ramp's own cut-off comes days earlier than the port's. Plan the loading date backwards from the earliest of these dates. Miss a cut-off and the container usually rolls to the next vessel.
Can beans be transloaded from rail or truck into containers?
It's common in the industry. Some shippers move beans out of the processor in hopper railcars or bulk trucks, and a transload facility near a rail ramp or port transfers them into containers, either bagged there or loaded in bulk with a liner. It's one way for a shipper without its own container-loading dock to export by container. The rules don't change after the transfer: a clean, dry container, the right packaging, an accurate weight, and the phytosanitary inspection arranged where the beans are actually loaded.
How does Conveyco handle dry bean exports?
We book the container space, line up the trucking or rail to the port, track the cut-offs and coordinate the documents with you, from the phytosanitary certificate to the EEI. Send us the product, packaging, origin and destination and we'll reply with a quote the same business day. More on how we move these crops: Pulses, Grains & Specialty Crops.
Sources
- USDA APHIS — Plant exports: aphis.usda.gov/plant-exports
- USDA APHIS — Phytosanitary Certificate Issuance and Tracking system (PCIT): aphis.usda.gov/plant-exports/pcit
- USDA APHIS — Phytosanitary Export Database (PExD): pcit.aphis.usda.gov/PExD
- USDA AMS — Federal Grain Inspection Service: ams.usda.gov
- USDA AMS — U.S. Standards for Beans: ams.usda.gov/grades-standards/beans
- U.S. Census Bureau — Schedule B: census.gov and the Schedule B search tool: uscensus.prod.3ceonline.com
- U.S. Census Bureau — Automated Export System (AES): census.gov/foreign-trade/aes
- Foreign Trade Regulations, 15 CFR 30.4 (filing deadlines): ecfr.gov
- IMO — Verification of the gross mass of a packed container (SOLAS): imo.org
- 23 CFR 658.17 — federal vehicle weight limits: ecfr.gov
Frequently asked questions
What size container is used to export dry beans?
Usually a 20-foot dry container. Beans are dense, so a 20-foot box typically reaches the allowed weight before it runs out of space, which means a 40-foot box rarely carries more beans. The carrier's maximum payload and U.S. road weight limits decide how much you can load.
Do dry bean exports need a phytosanitary certificate?
Most destination countries require one. In the U.S. it is issued by USDA APHIS through its PCIT system after an inspection. What the certificate must say depends on the destination — check the country's requirements in APHIS's PExD database before you load.
Do beans need an FGIS inspection or grade certificate?
Not by law in most cases. Official inspection and grading of beans by USDA AMS (FGIS) is a voluntary service, but many sales contracts and letters of credit call for it. If the contract requires an official grade, arrange it before the container is sealed.
When does the EEI have to be filed for an ocean shipment of beans?
For vessel cargo, the Foreign Trade Regulations require the Electronic Export Information to be filed in AES at least 24 hours before the cargo is loaded on the vessel. The filing returns an ITN, which goes on the shipping documents.
Should dry beans ship bagged or in bulk?
It depends mostly on the buyer. Bags suit buyers who sell or repack in bags and have no bulk unloading. Bulk in a container liner can carry the most product per box but needs a receiver who can tip or vacuum-unload the container. Agree the packaging in the sales contract.
How do I keep beans from getting damp in the container?
Start with a clean, dry, odor-free container and dry product, keep the load dry while you stuff it, and add protection such as kraft paper or desiccants. Temperature changes on the voyage can make moisture condense inside the box, so these steps matter even when the beans leave dry.
Shipping agri overseas?
Tell us the product, origin and destination. We reply the same business day — by email or phone, whichever suits you.
Get an agri export quoteMore on this industry: Pulses, Grains & Specialty Crops · all agri guides