Pulses, Grains & Specialty Crops guide
Phytosanitary certificates for bean and pulse exports
Short answer
Most countries require a phytosanitary certificate for U.S. beans, peas, lentils and chickpeas. You apply in USDA APHIS's PCIT system, an authorized certification official inspects the product before it is loaded, and the certificate is issued in PCIT. Check the destination's requirements in APHIS's PExD database first, because the certificate can only state what was actually done — additional declarations, treatments and permits have to be in place before inspection.
Tray Grismore · Co-Owner, Business Development
Last reviewed · 8 min read
On this page
| Issued through | USDA APHIS PCIT, by an authorized certification official (federal, state or county) |
|---|---|
| Requirements lookup | APHIS Phytosanitary Export Database (PExD), by country and commodity |
| Inspection timing | Before the product is loaded; within the importing country's time limit, or no more than 30 days before export if none is set |
| Re-exports | Foreign-origin pulses use a phytosanitary certificate for reexport |
| Common pitfall | Details that don't match the bill of lading, or a missing additional declaration |
What does a phytosanitary certificate for bean and pulse exports actually say?
A phytosanitary certificate is the official statement from the exporting country's plant protection service that a shipment of plants or plant products was inspected and meets the importing country's plant health requirements. For U.S. beans and pulses, that service is USDA APHIS. The format follows the international standard for phytosanitary certificates (ISPM 12), so an inspector at destination knows where to look.
On a bean or pulse shipment, the certificate typically identifies:
- The exporter and the consignee.
- The product, its botanical name, the quantity and the packaging.
- Distinguishing marks, such as lot or container numbers where the destination wants them.
- The place of origin and the declared means of conveyance and point of entry.
- Any additional declarations the importing country requires.
- Any treatment applied, such as fumigation, with its details.
The certificate covers plant pests. It says nothing about grade, protein, foreign material or food safety — those are separate documents.
How do you find out what the destination country requires for beans and pulses?
Start with the Phytosanitary Export Database (PExD), which APHIS keeps by country and commodity. For many destinations the entry for dry beans, peas or lentils lists:
- Additional declarations — specific statements the certificate must carry, often that the product is free of a named pest or came from a pest-free area.
- Treatments — for example a fumigation done before export and recorded on the certificate.
- Import permits — a permit the buyer must obtain in their own country, sometimes quoted on the certificate.
Ask your authorized certification official (ACO) to confirm the requirements early. APHIS asks exporters to contact the ACO as soon as possible so there's time to work out what the importing country needs.
If the buyer says the rules differ from PExD, you need official proof: an import permit or a written communication from the importing country's plant protection organization, in English or bilingual with English. APHIS states that a letter of credit is a financial document and cannot be treated as an official communication. So a phytosanitary clause in an L/C doesn't change what the certificate can say.
How do you apply for a phytosanitary certificate in PCIT?
The application goes through the Phytosanitary Certificate Issuance and Tracking system (PCIT). The usual sequence for a bean or pulse export:
- Set up access to PCIT and identify your ACO for the location where the product will be inspected.
- Apply for inspection in PCIT, with the destination, consignee, product, quantity and packaging.
- Make the product available. APHIS expects the exporter to provide access, labor and facilities for sampling and inspection, and the materials and labor for any required treatment.
- Inspection and any treatment are carried out and recorded.
- Issuance. If the certificate is issued, it is available in PCIT to print straight away. Some countries exchange certificates electronically (ePhyto) with the U.S.; APHIS keeps a list of participating trading partners.
Fees depend on the federal, state or county authority doing the inspection, so ask your ACO what applies at your location.
When should beans and pulses be inspected — before or after loading the container?
Before. APHIS asks exporters to arrange sampling or inspection before the goods go into containers or onto the vessel, and to mark or stamp shipping documents so nobody loads them early. Once bagged beans are stacked to the doors or bulk lentils are blown into a liner, the inspector can't properly sample them.
Timing also has an outer limit. Follow the importing country's time limit if it sets one. If it doesn't, APHIS says not to inspect more than 30 days before export. After inspection, you're responsible for protecting the certified product from infestation until it ships.
In practice, this means planning the inspection date backwards from your loading date, and the loading date backwards from the earliest cut-off — rail ramp, terminal or documentation. If the inspection slips, the container can roll to the next vessel.
How is a phytosanitary certificate different from FGIS and fumigation certificates?
Bean and pulse buyers often ask for three certificates that sound alike. They come from different places and prove different things.
| Phytosanitary certificate | FGIS inspection certificate | Fumigation certificate | |
|---|---|---|---|
| Issued by | APHIS, through an authorized certification official, in PCIT | USDA AMS Federal Grain Inspection Service or its official agencies | The licensed company that carried out the treatment |
| What it proves | Plant health — inspected and meets the importing country's pest requirements | Quality — grade and factors against U.S. standards | That a specific treatment was done, and how |
| Required by | Most importing countries' plant health rules | The sales contract or letter of credit (voluntary service for beans, peas and lentils) | The importing country, when PExD lists a treatment, or the buyer |
| Where to check | PExD and your ACO | The contract terms | PExD and the import permit |
When a treatment is a phytosanitary requirement, it usually has to appear on the phytosanitary certificate itself, not only on a separate fumigation certificate. Check PExD for how the destination wants it shown.
What goes wrong on bean and pulse phytosanitary certificates?
Many certificate problems are paperwork, not pests. Destination officials compare the certificate against the bill of lading, the commercial invoice and the import permit. Watch for:
- Consignee or quantity that doesn't match the bill of lading or invoice — often because the buyer changed the consignee after the application went in.
- A missing or reworded additional declaration. Many countries want the exact wording from PExD or the import permit.
- Treatment details missing from the certificate when the destination requires them on it.
- Inspection too early, outside the destination's time limit.
- Wrong certificate type. Lentils or chickpeas that were imported, cleaned and re-exported may need a phytosanitary certificate for reexport, which confirms foreign-origin product still meets the next country's requirements.
If a detail is wrong, contact your ACO quickly. It's far easier to fix before the container arrives than after it's held at the port. For the rest of the export paperwork — EEI, Schedule B and VGM — see how to export dry beans in containers.
How does Conveyco handle phytosanitary certificates on pulse exports?
We book the container, set the loading date against the cut-offs, and coordinate the documents with you so the PCIT application, the bill of lading and the invoice say the same thing. The inspection and the certificate stay with APHIS and your authorized certification official — we make sure the timing works around them. Send us the product, origin and destination for a quote the same business day. More on what we move: Pulses, Grains & Specialty Crops.
Sources
- USDA APHIS — Plant exports: aphis.usda.gov/plant-exports
- USDA APHIS — Plant and plant product export certificates: aphis.usda.gov/plant-exports/certification
- USDA APHIS — Exporter responsibilities: aphis.usda.gov/plant-export/responsibilities
- USDA APHIS — Phytosanitary Certificate Issuance and Tracking system (PCIT): aphis.usda.gov/plant-exports/pcit
- USDA APHIS — Phytosanitary Export Database (PExD): pcit.aphis.usda.gov/PExD
- USDA APHIS — ePhytosanitary certification trading partners: aphis.usda.gov/plant-exports/ephyto
- IPPC — ISPM 12, Phytosanitary certificates: ippc.int
- USDA AMS — Federal Grain Inspection Service: ams.usda.gov
Frequently asked questions
Who issues phytosanitary certificates for U.S. bean and pulse exports?
USDA APHIS runs the program, and certificates are applied for through its PCIT system. The inspection and the certificate come from an authorized certification official, who may be a federal, state or county officer depending on where the beans or pulses are. Your local official can tell you who covers your location.
How do I find the phytosanitary requirements for a destination country?
Look up the country and commodity in APHIS's Phytosanitary Export Database (PExD), and confirm with your authorized certification official. PExD lists additional declarations, treatments and import permits the country requires. If the buyer says the rules have changed, you need an official document such as an import permit — a letter of credit does not count.
Do beans and pulses have to be inspected before they go into the container?
APHIS asks exporters to arrange inspection or sampling before the goods are loaded into containers or onto the vessel, and to make the product available for inspection. Mark your shipping paperwork so the load isn't stuffed before the inspector has seen it.
How long before export can the phytosanitary inspection be done?
The importing country's time limit applies if it sets one. If it doesn't, APHIS says the inspection should not be more than 30 days before export. The shipper also has to protect the certified product from infestation between inspection and shipping.
What is a phytosanitary certificate for reexport?
It is used when foreign-origin plants or plant products entered the U.S. with a valid certificate and are then exported again. It confirms the product still meets the next country's requirements and was not exposed to infestation while it was here. U.S.-grown beans and pulses use the standard certificate.
Is an FGIS grade certificate the same as a phytosanitary certificate?
No. A phytosanitary certificate from APHIS covers plant pests and the importing country's plant health rules. An FGIS certificate from USDA AMS covers quality and grade, and for beans, peas and lentils it is a voluntary service that buyers often ask for in the contract. Many shipments need both.
Shipping agri overseas?
Tell us the product, origin and destination. We reply the same business day — by email or phone, whichever suits you.
Get an agri export quoteMore on this industry: Pulses, Grains & Specialty Crops · all agri guides